Get matched
Opens in a new tab
Business Funding

Small Business Financing by Industry: The Complete Guide

We may earn a fee from partner links.
Full disclosure below.

Chris Scarfo, Co-founder, Lending Gurus
Ten years in business banking before co-founding Lending Gurus. · Updated Nov 11, 2026

Every industry borrows a little differently. A trucking company waits on brokers to pay. A dental practice buys equipment that costs as much as a house. A restaurant lives on card sales that rise and fall with the weather. A contractor fronts labor and materials for weeks before the first draw. The money tools are mostly the same across the board, but which one fits depends on how your business earns and spends cash.

This guide walks through small business financing by industry, one vertical at a time: trucking and owner operators, healthcare and dental, automotive repair, contractors and the trades, restaurants, salons, gyms and beauty, ecommerce and retail, staffing, and franchises. For each one, I cover the cash flow pattern lenders see, the financing that tends to fit, the rules worth knowing, and where to read more. If you want the short version first, my business funding by industry overview is a short read. If you already know you need a revolving line or short term cash, the complete guide to a business line of credit and the complete guide to working capital loans go deeper on those products.

One thing up front. Guru is your lending sidekick, not a lender. Guru doesn’t lend or make funding decisions. Partners decide on amounts, pricing and terms. My job is to help you understand your options and match you with partners that fit.

How lenders look at your industry

Before a lender looks at your bank statements, it usually looks at what you do. Industry shapes how a lender thinks about risk, what collateral is available, how steady revenue looks month to month, and which programs you can use at all.

Your NAICS code

Most lenders and every SBA program classify your business with a North American Industry Classification System (NAICS) code. The SBA uses that code to decide whether your business counts as small. Its size standards in 13 CFR 121.201 are set by industry, mostly as a cap on average annual receipts and for some industries as a cap on employees. A business has to be small under those standards to get a 7(a) loan or a 504 loan.

Here is how the receipts caps compare for some of the industries in this guide, as listed in the federal table in November 2026:

Industry (NAICS code)SBA size standard, average annual receipts
General freight trucking, local (484110)$34.0 million
General freight trucking, long distance, truckload (484121)$34.0 million
Offices of physicians, except mental health specialists (621111)$16.0 million
Offices of dentists (621210)$9.0 million
General automotive repair (811111)$9.0 million
Electrical contractors (238210)$19.0 million
Plumbing, heating and air conditioning contractors (238220)$19.0 million
Commercial and institutional building construction (236220)$45.0 million
Full service restaurants (722511)$11.5 million
Limited service restaurants (722513)$13.5 million
Beauty salons (812112)$9.5 million
Barber shops (812111)$9.5 million
Fitness and recreational sports centers (713940)$17.5 million
Temporary help services (561320)$34.0 million
Source: eCFR, 13 CFR 121.201. Check the current table for your exact code before you apply.

Most small businesses sit well under these caps. The point is that the SBA asks the question by industry, and so do most lenders when they decide which products and terms to offer.

Industry restrictions

Some lenders and programs skip certain industries entirely. The SBA lists “not be a type of ineligible business” among its 7(a) eligibility basics, and its 504 program can’t fund passive or speculative activities, per the SBA 504 page. Private lenders keep their own lists too. If a partner doesn’t serve your industry, it isn’t a judgment about you. It is a policy, and another partner may see it differently.

Cash flow pattern

Lenders want to know when money comes in and when it goes out. A salon with daily card sales looks very different from a contractor paid in large draws, or a staffing firm that pays workers every week and waits on clients to pay invoices. The pattern often decides the product more than the industry name does.

Matching the financing to the problem

Across every vertical below, the same handful of tools come up. Here is the short version of what each one is built for.

504 loans deserve a special note for industries that own real estate or long lived equipment. The SBA describes them as long term, fixed rate financing for major fixed assets, with 10, 20 and 25 year maturities, and they can’t be used for working capital or inventory, per the SBA 504 page. Our SBA 504 loan guide explains how the structure works.

Trucking and owner operators

Trucking is a cash flow business with big fixed costs. You buy or lease the truck and trailer, pay for fuel, tires, insurance and repairs as you go, and often wait weeks for a broker or shipper to pay. That gap between hauling a load and getting paid is the core financing problem. My full post on trucking business funding covers it in depth, and our trucking financing page shows how Guru approaches carriers.

Rules that shape the numbers

If you haul cargo in interstate commerce with a truck rated or loaded at 10,001 pounds or more, FMCSA requires a USDOT number, per its registration guidance. For hire carriers moving nonhazardous property interstate in that weight class must carry at least $750,000 in public liability coverage under 49 CFR 387.9, and higher minimums apply to many hazardous loads. Trucks with a taxable gross weight of 55,000 pounds or more also owe the federal heavy highway use tax filed on IRS Form 2290. Expect lenders to ask about all three, because they show you are set up to operate and they are real costs your cash flow has to carry.

Financing that tends to fit

Owner operators

If you are a one truck owner operator, lenders look closely at your personal credit, your time under your own authority and the condition of your equipment. Leasing onto a larger carrier can mean steadier settlements, which helps a lender read your income. Keep business and personal money in separate accounts so your statements tell a clean story.

When you are ready to compare, Guru can match you with partners such as Fora Financial or help you compare offers through 1West. Partners decide every offer.

Healthcare, medical and dental practices

Medical and dental practices tend to have strong revenue and expensive equipment. The cash flow problem is timing: you deliver care today and wait on insurers and patients to pay. Big moments like opening a second location, buying out a partner or acquiring a practice call for larger, longer financing. My post on medical and dental practice financing covers equipment, buyouts and cash gaps in detail, and our healthcare financing page shows how Guru helps practices.

Medicare receivables are different

If you bill Medicare, know this before you look at factoring. Medicare generally does not pay amounts due a provider to anyone else under an assignment, power of attorney or other direct payment arrangement, per 42 CFR 424.73. A similar rule covers physicians and other suppliers under 42 CFR 424.80. There are narrow exceptions, such as a billing agent paid in the provider’s name under strict conditions. In practice, that limits traditional factoring of Medicare claims, so many practices look at lines of credit or term loans instead. Talk with your healthcare attorney before you sign anything tied to government receivables.

Financing that tends to fit

  • SBA 7(a) loans for practice acquisitions, partner buyouts and buildouts. The SBA lists changes of ownership, real estate and equipment among eligible uses on its 7(a) page. Size matters here too: the federal cap is $16.0 million in receipts for physician offices and $9.0 million for dental offices, per 13 CFR 121.201.
  • Equipment financing for imaging, chairs, lasers and other clinical gear.
  • A line of credit to bridge the gap between treatment and insurance payment.

If you are buying an existing practice, read how acquisition financing works too. For SBA backed options, you can compare offers through 1West. Partners decide every offer.

Automotive repair shops

Repair shops carry a mix of costs that hit at different times: lifts, diagnostic tools and alignment machines up front, parts inventory every week, and technician payroll every pay period. Revenue can swing with the seasons and with how soon fleet and commercial customers pay. The SBA size standard for general automotive repair is $9.0 million in average annual receipts, per 13 CFR 121.201, so most independent shops are small in the SBA’s eyes.

Financing that tends to fit

  • Equipment financing for lifts, scanners and other shop equipment. Compare leasing and buying before you commit, and look at Section 179 financing with your CPA for the tax side.
  • A line of credit for parts inventory and slow months.
  • Invoice financing if fleet or commercial accounts pay on terms. See invoice financing vs a line of credit.
  • SBA 7(a) or 504 loans if you are buying the building or a second location.

This section covers financing for the repair business itself. To see what fits your shop, Guru can match you with partners such as Fora Financial or help you compare offers through 1West.

Contractors, construction and the trades

Contractors front money. You buy materials, pay crews and rent equipment before the first progress payment arrives, and retainage can hold back part of what you earned until the job closes out. Our contractor financing page covers how Guru helps general contractors and trades like electrical, plumbing and HVAC, and construction equipment financing goes deep on the equipment side.

Bonding comes first on public work

On federal construction contracts over $150,000, the Miller Act requires performance and payment bonds, per FAR 28.102. For federal contracts over $35,000 up to $150,000, the contracting officer picks payment protections, such as a payment bond or an irrevocable letter of credit. Many state and local projects have their own bonding rules.

If a surety won’t write your bonds, the SBA backs bid, payment and performance bonds through certain surety companies. Its surety bond program covers contracts up to $9 million for nonfederal work and up to $14 million for federal work. On the performance and payment bonds it backs, the SBA charges a fee of 0.6 percent of the contract price, and it charges no fee on bid bonds.

Financing that tends to fit

  • SBA CAPLines. The SBA describes a Contract CAPLine that finances the costs of specific contracts and a Builders CAPLine for small general contractors building or rehabbing property for resale, per its lender program page. Both can be revolving or nonrevolving.
  • Equipment financing for excavators, trucks and tools. The heavy equipment financing guide and equipment financing requirements cover what lenders check.
  • A line of credit to cover materials and payroll between draws.
  • Invoice factoring for commercial work billed on terms. See purchase order financing if you need cash to fill a large order first.

Size standards for the trades vary. Electrical and plumbing, heating and air conditioning contractors have a $19.0 million cap and commercial building construction has a $45.0 million cap, per 13 CFR 121.201. For SBA backed and other options, you can compare offers through 1West, and Guru can also match you with partners such as Fora Financial.

Restaurants and food service

Restaurants run on thin margins, daily card sales and expensive kitchens. Equipment breaks at the worst time, menus change with the season, and a slow month can land right before rent is due. The equipment side is covered in restaurant equipment financing, and our restaurant financing page shows how Guru approaches food businesses.

Financing that tends to fit

  • Equipment financing or leasing for ovens, refrigeration, hoods and point of sale systems.
  • A line of credit for inventory, repairs and seasonal dips.
  • SBA 7(a) loans for buildouts, second locations or buying a restaurant. SBA 504 loans can work if you are buying the building.
  • Merchant cash advances are common in restaurants because repayment comes from card sales. They can cost far more than a loan, so compare them carefully with the MCA cost calculator and read the pros and cons of a merchant cash advance.

The SBA size standard is $11.5 million for full service restaurants and $13.5 million for limited service restaurants, per 13 CFR 121.201. When you are ready, Guru can match you with partners such as Fora Financial or help you compare offers through 1West.

Salons, barbershops, gyms and beauty

Salons, barbershops, spas and gyms share a pattern: steady daily or monthly revenue, a buildout up front, and equipment that wears out. The details matter, though. A salon that rents booths has a different income stream than one that pays stylists on commission. My guide to salon and barbershop financing covers both setups.

Financing that tends to fit

  • Equipment financing for chairs, dryers, treatment beds and fitness equipment.
  • A term loan or SBA 7(a) loan for a buildout, a remodel or a second location.
  • A line of credit for product inventory and slow seasons.

Gyms deserve their own note. Fitness centers fall under the amusement and recreation sector, and some partners don’t serve that sector at all, so expect a smaller field of options. The SBA size standard for fitness and recreational sports centers is $17.5 million, and beauty salons and barber shops sit at $9.5 million, per 13 CFR 121.201. To compare options, Guru can match you with partners such as Fora Financial or help you compare offers through 1West.

Ecommerce and retail

Online sales keep growing as a share of retail. The Census Bureau estimated that ecommerce made up 17.1 percent of total U.S. retail sales in the second quarter of 2026, seasonally adjusted, per its quarterly ecommerce report. For online sellers and stores alike, the core financing problem is inventory: you pay suppliers weeks or months before you sell the goods. My full ecommerce business funding guide covers the options, and our retail financing page shows how Guru helps stores.

Financing that tends to fit

Watch the timing of marketplace payouts and returns when you size a draw. When you are ready to compare, Guru can match you with partners such as Fora Financial or help you compare offers through 1West.

Staffing agencies

Staffing firms carry one of the toughest cash flow gaps in small business. You pay workers every week, plus payroll taxes, while clients often pay invoices weeks later on net terms. The IRS sets the employer share of Social Security at 6.2 percent and Medicare at 1.45 percent of wages, per IRS Topic 751, and those deposits are due on schedule no matter when clients pay. My post on staffing agency funding covers how agencies make weekly payroll while clients pay later.

Financing that tends to fit

  • Invoice factoring built for payroll cycles. Compare non recourse factoring with recourse options and check invoice factoring costs.
  • A line of credit once you have a track record and steady clients.
  • SBA CAPLines. The SBA describes a Working CAPLine as an asset based revolving line of credit, per its lender program page.

The SBA size standard for temporary help services is $34.0 million, per 13 CFR 121.201. To compare options, Guru can match you with partners such as Fora Financial or help you compare offers through 1West.

Franchises

Buying a franchise is part startup and part acquisition. You pay a franchise fee, build out a location to the brand’s standard and buy equipment and opening inventory, often before you have a dollar of revenue. Lenders lean on the brand’s track record and on your own experience and credit.

Read the FDD before you borrow

Under the FTC Franchise Rule, a franchisor must give you its Franchise Disclosure Document at least 14 calendar days before you sign a binding agreement or pay anything, per 16 CFR 436.2. Four items matter most for financing, per 16 CFR 436.5: Item 7 lists your estimated initial investment, Item 10 discloses any financing the franchisor offers, Item 19 covers financial performance representations if the franchisor makes them, and Item 21 includes the franchisor’s financial statements. Lenders read these too, so read them first.

SBA loans and the Franchise Directory

If you plan to use an SBA loan, check the brand first. The SBA Franchise Directory lists franchise brands the SBA has reviewed and found eligible, and brands that meet the FTC definition of a franchise must be in the directory to get SBA financing, per the SBA. The SBA also says a listing is not an endorsement of the brand and doesn’t ensure the business will succeed.

Financing that tends to fit

  • SBA 7(a) loans for the franchise fee, buildout, equipment and working capital. See our SBA 7(a) loan guide and estimate payments with the SBA loan calculator.
  • Acquisition financing if you are buying an existing franchise location. See buying an existing business.
  • Equipment financing for the brand’s required equipment package.
  • Franchisor financing if Item 10 shows the franchisor offers any.

For SBA backed and other options, you can compare offers through 1West, and Guru can also match you with partners such as Fora Financial.

Lines of credit across industries

A revolving line of credit shows up in almost every section above, because nearly every business has timing gaps. For established businesses that fit, Plexe is Guru’s preferred line of credit partner. Plexe looks for businesses with 2 or more years in business, $15,000 or more a month in bank inflows, a FICO score of 685 or higher, a credit file of 5 or more years with no bankruptcies or charge offs, a bank balance of $5,000 or more on most days, and owners who are U.S. citizens or permanent residents. Lines go up to $250,000, and applying uses a soft pull.

Plexe serves businesses in eligible states only. California, Hawaii, Nevada, North Dakota, South Dakota, Tennessee and Puerto Rico are not eligible. Plexe also doesn’t serve some industries, including gyms and other amusement and recreation businesses, pharmacies, car dealerships, solar installers, law firms, casinos and gambling, CBD businesses, and nonprofits. Each offer is individually assessed, and the conditional offer shows draw amounts, fees and weekly repayments before you commit.

If that isn’t you, a line may still be possible through other partners, or another product may fit better. The business line of credit guide covers requirements and costs, the business line of credit calculator shows what a draw can cost, and line of credit requirements explains what lenders check.

How to prepare, whatever your industry

  1. Know your numbers. Average monthly deposits, time in business, existing debt payments and your credit picture.
  2. Gather documents. Recent business bank statements, tax returns, a profit and loss statement, a balance sheet and ID. The business loan documents checklist helps.
  3. Bring your industry paperwork. Operating authority and insurance for carriers, licenses for practices and trades, bonding history for contractors, the FDD for franchises, and aging reports if you bill on terms.
  4. Match the product to the problem. Short term needs fit lines, working capital and factoring. Long term assets fit term, equipment and SBA loans.
  5. Compare total cost. Put every offer on the same footing with the business loan calculator, and read APR vs interest rate.
  6. Check where you stand. The business loan eligibility checker gives you a first read before you apply.

If a lender turns you down, federal rules under the Equal Credit Opportunity Act (Regulation B) generally require the lender to notify you of its decision within 30 days of a completed application and give you the specific reasons or tell you how to ask for them. Use those reasons to fix what you can before you apply again.

Guru’s Take

Start with the cash flow problem in your industry, not with a product. A restaurant covering a slow week and a contractor fronting a job do not need the same tool. If you have been in business 2 or more years with solid credit, our preferred line of credit partner is Plexe, and it serves eligible states and industries only (not California). We match you with partners, and the partners decide your limit, pricing and terms.

How Lending Gurus helps

Guru is your lending sidekick. Guru doesn’t lend or make funding decisions. Guru learns how your business earns and spends money, then matches you with partners that work with businesses like yours, and partners make every decision on amounts, pricing and terms. Partners Guru may match you with include Fora Financial and 1West. If you have been in business 2 or more years with steady deposits and solid credit, in an eligible state and industry, Plexe is my preferred line of credit partner. California businesses are not eligible for Plexe.

FAQ

Does my industry affect my chances of getting a business loan?

It can. Industry shapes how lenders see risk, what collateral you have and which programs you can use. Some lenders don’t serve certain industries at all, while others specialize in them. Your revenue, time in business and credit still carry a lot of weight.

Which industries can’t get SBA loans?

The SBA excludes certain business types, and the 504 program can’t fund passive or speculative activities. Your business also has to be small under the size standard for its NAICS code. Start with the SBA’s 7(a) eligibility basics and ask a lender about your specific business.

What is the best loan for a seasonal business?

Usually a line of credit or a seasonal working capital product, because you only draw what the slow season needs. The SBA’s Seasonal CAPLine is built for seasonal increases in receivables and inventory. Compare total cost before you choose.

Can I factor invoices in any industry?

Factoring works best when you bill other businesses on terms, which is why it is common in trucking, staffing and commercial contracting. Medicare claims are a special case, because Medicare generally won’t pay a provider’s claims to another party under an assignment.

How do I find my NAICS code?

Ask your accountant or check how your business is classified on your tax filings. Then look up the SBA size standard for that code in 13 CFR 121.201.

This guide is general information, not financial, legal or tax advice. Rules and program limits change, so check the linked sources for current figures. Lenders set their own requirements and terms, and partners make all funding decisions. Talk with your CPA or attorney about your situation. Read our editorial policy.

Sources

See your options in about 2 minutes

Ask Guru

Related

How we make money

Lending Gurus compares options and doesn’t lend. We may earn a referral fee when you apply through our links, but no lender pays for a review or a score, and partner status never changes one. Advertiser disclosure.